Voltage Amplifiers: 1 GHz Ultra-Wideband
DUPVA-1 Series
- Gain Switchable in 10 dB Steps up to 70 dB
- Bandwidth 1 kHz to 1.2 GHz
- Bandwidth Independent of Gain Setting (Guaranteed)
- 1.9 dB (330 pV/√Hz)
- Local and Remote Gain Control
Voltage amplifiers with variable Gain - 1 kHz to 1 GHz
The Ultra-Wideband Voltage Amplifiers Series DUPVA-1 is designed for fast and precision measurements with large dynamic range. Gain can be adjusted by the local gain selector or via an opto-isolated remote control interface. The gain independent frequency response guarantees for precise time resolved measurements at any gain setting. No significant change in rise time will occur when changing the gain setting which is essential for reliable time resolved measurements. Additionally, the frequency response is optimized for being very flat over the full frequency range. No gain peaking or significant distortion will occur in pulse and transient measurements.
Applications
Oscilloscope and Transient Recorder Preamplifier
Photomultiplier and Microchannel-Plate Amplifier
Signal Booster for Optical Receivers and Current Amplifiers
Time-Resolved Pulse and Transient Measurements
Automated Measurement Systems
| The LUCI-10 amplifier interface allows remote control of FEMTO amplifiers and photoreceivers with a remote control capability from a standard Windows PC with USB port. |
Ultra-Wideband Voltage Amplifiers - 1 GHz
Click Part # to view pdf datasheet
| Model | DUPVA-1-60 | DUPVA-1-70 |
| Lower Cut-Off-Frequency | 1 kHz | 1 kHz |
| Upper Cut-Off-Frequency | 1.2 GHz | 1.1 GHz |
| Rise/Fall Time | 380 ps | 390 ps |
| Gain | 20/30/40/50/60 dB | 30/40/50/60/70 dB |
| Gain Flatness | 0.15 dB | 0.15 dB |
| Input Noise |
NF 3.0 dB (450 pV/√Hz) |
NF 1.9 dB (330 pV/√Hz) |
| Output Power | 13 dBm (-1 dB compression) | 12 dBm (-1 dB compression) |
| Input/Output | 50 Ω, SMA connector | 50 Ω, SMA connector |
| Power Supply | ±15 V, + 350 mA / -100 mA | ±15 V, + 250 mA / -100 mA |
| Monitor Output | DC ... 100 kHz Monitor Output at D-Sub connector, Gain of 1 | |
| Control Interface | 3 opto-isolated digital Inputs, TTL/CMOS compatible | |
| Case | 155 x 105 x 40 mm (L x W x H), Weight 510 g (1.2 lbs) | |
| Indication of selected gain setting by LED. Output short-circuit protected. Power supply via 3-pin LEMO socket. A mating connector is provided with the device. Optional power supply PS-15 is available. For further information please view the datasheet. | ||
Typical Performance Characteristics
