News / New Products

Electro Optical Components Inc. (EOC) Turns 10 - 4/08

FEMTO High Speed 400 MHz Photoreceiver - 8/07

High Pulse IR Source - 7/07
Infrared pulsable source developed by INTEX offers high intensity and ability to pulse at high frequencies

Victor Yen, Infrared Pioneer, Retires - 3/07

New Current Amplifier with 400 MHz Bandwidth - 1/07

Fiber Combiner

IMM Photonics GmbH has developed their Fiber Combiner. This Fiber Combiner allows you to merge light from several sources (e.g. laser, laser diodes, High Power LEDs etc.) into one fiber. With the Fiber Combiner, it is possible in fluorescence-microscopical applications to illuminate samples with different wave lengths or to combine several optical signals on a single detector.

The Fiber Combiner can be fitted with the standard ST, FC, SMA, DIN, E2000 connectors or special ferrules and adapters as required for your application. IMM can vary the diameter, length and number of the fibers to meet your requirements. The Fiber Combiner in the picture consists of four 400 µm HCP fibers 300 mm long terminated with ST connectors.

Applications include a variety of sensor applications, in the fields of biotechnology, medical technology, lighting technology etc. More information

New Laser Diode Module with thermo electric cooler (TEC)

The new temperature stabilized Laser Diode Modules from IMM Photonics GmbH are available in the wavelength range from 375 nm to 2000 nm. The output power is depending on the laser diode used.

The new module series is equipped with a bipolar TEC-controller. This allows the laser’s temperature to be stabilized to optimize its performance. The temperature is controlled externally via a SUB-D connector. The size of the Laser Diode Module is a compact, 38 mm diameter by 160 mm long.

The TEC-Laser Diode Modules are very well suitable for measuring and analytical application.

More information

New Femtowatt Photoreceiver from FEMTO - 7/05

New Logarithmic Wideband Amplifier from FEMTO - 1/05

New High Speed Photoreceivers from FEMTO - 8/04

Low microphonic, high gain pyroelectric detectors from InfraTec GmbH - 07/04

FEMTO introduces 5 low noise voltage amplifier modules - 4/04

FEMTO introduces variable gain high speed current amplifier - 12/03

About ELECTRO OPTICAL COMPONENTS Inc.

ELECTRO OPTICAL COMPONENTS, Inc. is the exclusive U.S. distributor of key components for laser & electro-optical systems spanning the ultraviolet (UV) to the far infrared (IR): detectors, laser diodes, laser systems, laser optics, coatings and filters, amplifiers, drivers and modulators.

ELECTRO OPTICAL COMPONENTS Inc. is staffed by personnel with many years of technical and technical component sales experience in the American laser and photonics industry.

Over the entire customer product cycle, ELECTRO OPTICAL COMPONENTS Inc. and each of its partners combine as a team to respond to customer requirements. Through research, development and prototyping, we consistently provide technical support and work closely with our customers to ensure proper cost/performance tradeoffs are made for the optimum component specifications. In production, we are dedicated to consistently superior product quality, and take pride in our workmanship and ability to meet delivery commitments.

For a one page document detailing our product range, please click here.
(A pdf reader such as Adobe Acrobat Reader, is required to view this file and many data sheets on our site. If you don't have one, click here for a free copy of Acrobat Reader.)

For more information & quotations, please contact us.

ELECTRO OPTICAL COMPONENTS, Inc.

5460 Skylane Blvd., Santa Rosa, CA 95403
Tel: 707-568-1642
Fax: 707-568-1652
Email: info@eoc-inc.com

http://www.eoc-inc.com