Photoreceivers: OE-200
|
|
Compact unit with fiberoptic input. The switchable 10 Hz lowpass filter enables accurate CW optical power measurements down to picoWatts. The conversion gain is selectable over a wide range of 9 decades. The opto-isolated digital inputs allow remote TTL-control. |
|
Hz Equ. Input
NoiseThe ultimate low-noise high-speed fiber-optical power meter
Packed with features, the OE-200 Fiber-Optical Power Meter is designed for a wide range of applications that require fast measurement of low light levels. It is ideally suited, for example, for CW measurements, time resolved measurements down to the µs-region and as the preamplifier for lock-in systems.
The OE-200 offers many more features than can be expected from a standard power meter, including selectable conversion gain from 103 to 1011 V/W, switchable AC/DC-coupling, switchable 10 Hz lowpass filter and the capability of manual and opto-isolated remote control. Due to its very low dark current (2pA), low noise and high speed a superb dynamic range is achieved. All this in a rugged, compact EMI-shielded case, designed with the user in mind and built to guarantee trouble free operation even in very rough and noisy environments.
Calibration traceable to NIST Standards
The high stability and low drift of the OE-200 ensures repeatable and consistent measurements even at highest gain setting. Calibration traceable to NIST Standards guarantees reliable results and interchangeability of OE-200 modules.
Applications:
- Fiber Alignment Systems
- Fast power monitoring in fiber systems
- Test of laser-diode to fiber coupling
- Linearity measurements over 10 decades
- Calibration of optical communication systems
- Time-resolved power measurements
The following versions are
available:
(Click Part # to view pdf datasheet)
| Part # | ||||
| Detector Type | Si-PIN | Si-PIN | InGaAs-PIN | InGaAs-PIN |
| Detector Size | Dia. 1.2 mm | 1.1 mm x 1.1 mm | Dia. 0.1 mm | Dia. 0.1 mm |
| Spectral Range [nm] | 320-1060 | 190-1000 | 900-1700 | 900-1700 |
| Calibrated at [nm] | 830 | 830 | 1300 | 1550 |
| Fiber Input | FC, ST or SMA | FC, ST or SMA | FC or ST | FC or ST |
| Equ. Input Noise
(dependent on gain setting) [/  Hz] |
10 fW ... 24 pW | 17 fW ... 69 pW | 11 fW ... 25 pW | 10 fW ... 23 pW |
The following characteristics are valid for all versions:
| Performance Range | Low Noise | High Speed | ||||||||||||
| Conversion Gain[V/W] | 103 | 104 | 105 | 106 | 107 | 108 | 109 | 105 | 106 | 107 | 108 | 109 | 1010 | 1011 |
| Bandwidth [- 3 dB] [kHz] | 500 | 500 | 400 | 200 | 45 | 7 | 1.2 | 500 | 500 | 400 | 200 | 45 | 7 | 1.2 |
| Rise Time(10%-90%) | 700 ns | 700 ns | 900 ns | 1.8 µs | 8 µs | 50 µs | 300 µs | 700 ns | 700 ns | 900 ns | 1.8 µs | 8 µs | 50 µs | 300 µs |
| Accuracy Performance | Conversion Gain ±5 %, Flatness 0.1 dB, Linearity 1% (Popt<1mW) | |||||||||||||
| Lowpass Filter | Switchable to 10 Hz | |||||||||||||
| Output Performance | ±10 V (@ 10 kOhm load) | |||||||||||||
| Power Supply | ±15 V, +150 mA/-100 mA | |||||||||||||
| Control Interface | 5 opto-isolated digital Inputs, TTL/CMOS compatible, Offset Control Voltage Input | |||||||||||||
| Case | 150 x 55 x 40 mm (L x W x H), Weight 320 g (0.74 lbs) | |||||||||||||
| Offset adjustable with trimpot or external control voltage. LED overload detection. Output short-circuit protected. Power supply via 3-pin LEMO, we provide a mating connector. Optional remote power supply available. For further Information, please view the datasheet. | ||||||||||||||
