| Model | OE-300-SI-30-FST | OE-300-SI-10-FST | OE-300-IN-01-FC | OE-300-IN-03-FST |
| Detector | Si-PIN | Si-PIN | InGaAs-PIN | InGaAs-PIN |
| Detector Size (mm) | Ø 3.0 | 1.0 x 1.0 | Ø 0.08 | Ø 0.3 |
| Spectral Range | 320-1000 nm | 400-1000 nm | 900-1700 nm | 800-1700 nm |
| NEP (Dependent on Gain Setting)[/√Hz] | 81 fW - 325 pW | 76 fW - 322 pW | 47 fW - 180 pW | 52 fW - 192 pW |
| Bandwidth | 200MHz | 200 MHz | 200 MHz | 200 MHz |
| Datasheet | OE-300-SI-30-FST | OE-300-SI-10-FST | OE-300-IN-01-FC | OE-300-IN-03-FST |
| Performance Range | Low Noise | High Speed | ||||||||||
| Gain Setting [V/A] (Transimpedance) | 102 | 103 | 104 | 105 | 106 | 107 | 103 | 104 | 105 | 106 | 107 | 108 |
| Bandwidth [- 3 dB] [MHz] | 200 (100)1 | 80 (60)1 | 14 | 3.5 | 1.8 | 0.22 | 175 (100)1 | 80 (60)1 | 14 | 3.5 | 1.8 | 0.22 |
| Accuracy Performance | ±1 % (transimpedance) | |||||||||||
| Low Pass Filter | switchable to 1 MHz and 10 MHz | |||||||||||
| Output Performance | ±1 V (@ 50 Ώ load), for linear amplification | |||||||||||
| Power Requirements | ±15 V, +150 mA/-100 mA typ., ±200 mA recommended | |||||||||||
| Control Interface | 5 opto-isolated digital inputs, TTL/CMOS compatible, analog offset control voltage input | |||||||||||
| Case | 170 x 60 x 45 mm (L x W x H), weight 320 g (0.74 lb.) | |||||||||||