| NC-0768 | NB-1940-4.5-H2O | 1,940 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Fused Quartz | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0446 | NB-2700-4.5-CO2 | 2,700 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Fused Quartz | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0822 | NB-2950-4.5-H20 | 2,950 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Fused Quartz | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0464 | NB-4260-4.0-CO2 | 4,260 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Sapphire | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0465 | NB-4500-4.5-N20 | 4,500 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Sapphire | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0466 | NB-4700-4.5-CO | 4,700 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Sapphire | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0467 | NB-5250-4.5-NO | 5,250 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Sapphire | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0823 | NB-7400-4.5-SO2 | 7,400 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Germanium | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
| NC-0824 | NB-10600-4.5-CO2 | 10,600 | 1.50 | 4.30 | ±0.50 | 60.00 | Fully blocked out of band | Ø25.00 | 5.00 | Ø21.00 | Mounted in standard holders | Germanium | Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) | B or better |
