skip to Main Content
  • Proportional/integral temperature controller
  • Remote analog control Thermistor, AD590 or J, K, or T thermocouple temperature feedback
  • Up to 60-watt capacity
  • Low Cost
  • Two-year Warranty
  • Built in current limit
  • Variety of optional cold plate assemblies and TEC’s available
  • Provides tight control of Thermoelectric Cooler RFI noise
  • Computer control
  • Adaptable to existing instrument with a Thermoelectric Cooler
  • One instrument covers a wide range of applications
  • Obtain P/I control at a fraction of the cost of other devices
  • Exceptional customer protection
  • Protects the TEC controller from damage

Applications (Cooling of…)

  • IR Detectors
  • Integrated circuits
  • CCD’s
  • Thin film chemistry
  • Microscope slide
  • Laser diodes
  • Cuvets
  • Test tubes
  • Medical instrumentation
  • Aerospace systems


Sensor TypesThermistor 1K @ 25°C or 10K @ 25°C
Analog Devices AD590 - optional
J,K, or T Thermocouple - optional.
Sensor AccuracyDepends on option selected
Thermistor Range0-20 KΩ or 0-200KΩ, selectable by internal jumper
TEC VoltageLimit 12.0 volts standard
TEC Maximum Current2.5 Amperes Standard. 5.0 Amperes Optional.
TEC Output ConnectorMate Provided (DE09P)
Front Panel Display3 1/2 digit DPM LCD reflective. Digit height 0.5 inch
Display ChoicesThermistor resistance in KΩ
TEC current
TEC Temp in °C (Available only with AD590)
Set points
Display Resolution0.1 KΩ on 10 KΩ range
0.01 KΩ on 1 KΩ range
Temperature Range-35 to 100°C on 10 KΩ range
-100 to 50°C on 1 KΩ range
-55 to 150°C with AD590
Control LoopProportional and Integral
Control Stability<0.1°C
TEC Current Noise<10 milliamps rms
Method of Setting Operating Point22-turn potentiometer
AC Power 115/230 VAC, 50-60 Hz (user to specify)
25 watts (less TEC power)
Internal CoolingFan
Weight<5 lbs less TEC
Dimensions in Inches9.4 L x 5.8 W x 2.8 H

For more information or if you have questions about the thermoelectric cooler TEC controller, please contact us.

Back To Top