IR Filters: Long Wave Pass Stock Filters

Return to All Stock Filters Page

CodeT 5% Cut on [nm]T 5% Cut on Tol. ± [%]T(avg): [%]T(pk): [%]T(avg) Range: [µm]BlockingSize [mm]Thickness [mm]Clear Aperture ≥ [mm]SubstrateGradeGrade Classification
SLWP-1272-0016341,2720.25%69.8790.091.342 - 2.544Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1297-0016351,2970.25%70.8989.961.374 - 2.594Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1315-0016361,3150.25%71.5390.321.389 - 2.630Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1371-0016321,3710.25%79.3192.481.440 - 2.742Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-1382-0016751,3820.25%80.2193.711.454 - 2.764Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1419-0016731,4190.25%79.1594.331.499 - 2.838Fully blocked lowersØ23.001.00Ø21.00 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1419-0016741,4190.25%79.1694.331.499 - 2.838Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-1430-0016911,4300.25%80.8493.621.500 - 2.860Fully blocked lowersØ25.401.00Ø23.40 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1438-0015491,4381.00%61.5953.051.499 - 2.876Fully blocked lowersØ23.001.00Ø21.00 SiScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1453-0016211,4530.50%84.9396.601.502 - 2.906Fully blocked lowersØ25.400.80Ø23.40 SiScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1469-0012091,4690.25%77.2893.011.567 - 2.930Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1476-0006081,4760.30%86.4093.521.627 - 2.952Fully blocked lowersØ25.400.50Ø23.40 SiSurface Quality not classifiedC - Unclassified
SLWP-1476-0012081,4760.50%77.9592.741.562 - 2.950Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1482-0012071,4820.25%77.2991.031.559 - 2.964Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1486-0012101,4860.25%77.8491.291.550 - 2.972Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1490-0012061,4900.50%78.9991.861.551 - 2.980Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1492-0014911,4920.25%75.0672.121.552 - 2.984Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1500-0014891,5000.25%74.9172.551.561 - 3.000Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-1500-0014901,5000.25%74.9172.551.561 - 3.000Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1504-0005011,5040.30%85.5992.401.663 - 3.008Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1576-0016371,5760.25%75.4189.701.649 - 3.152Fully blocked lowersØ23.001.00Ø21.00 SiO2Surface Quality not classifiedC - Unclassified
SLWP-1779-0015861,7790.50%59.2336.671.878 - 3.558Fully blocked lowersØ19.981.52Ø17.98 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1819-0016391,8190.25%58.6763.451.906 - 3.638Fully blocked lowersØ23.001.10Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-1821-0012051,8210.25%86.0696.101.913 - 3.642Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-1825-0016331,8250.25%66.9570.771.888 - 3.650Fully blocked lowers to <1.000Ø25.401.00Ø23.40 SiScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-1866-0016381,8661.00%82.7991.601.948 - 3.732Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-2492-0016142,4920.25%60.1163.442.642 - 4.984Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-3130-0016133,1301.00%77.9988.613.323 - 6.260Fully blocked lowers from 2.100 to ~3.000 Ø25.401.00Ø23.40 Al2O3Scratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-3162-0014513,1620.25%57.7856.013.330 - 6.324Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-3166-0011033,1660.30%67.4479.263.278 - 4.200Fully blocked lowersØ25.401.00Ø23.40 SiO2Surface Quality not classifiedC - Unclassified
SLWP-3166-0011043,1660.30%67.4480.443.278 - 4.200Fully blocked lowersØ25.401.00Ø23.40 SiO2Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-3375-0010533,3751.00%84.0196.363.541 - 6.750Fully blocked lowersØ25.003.30 (Mounted in a Standard Holder)Ø23.00 SiO2Scratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-3759-0016813,7590.25%73.1589.943.904-7.518Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-4354-0007284,3540.25%80.0096.704.563 - 8.707Fully blocked lowersØ30.001.00Ø28.00 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-4388-0001294,3880.50%81.1092.604.758 - 9.516Fully blocked lowersØ35.001.00Ø33.00 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-4865-0015524,8650.25%59.5963.015.089 - 9.730Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-4963-0015514,9630.25%59.5563.135.193 - 9.926Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-5161-0017415,1610.25%82.1690.145.371 - 10.322Fully blocked lowersØ25.400.50Ø23.40 GeSurface Quality not classifiedC - Unclassified
SLWP-7168-0004927,1680.25%57.4663.497.572 - 14.336Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-7180-0004217,1800.25%77.2994.217.423- 14.360Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-7181-0004227,1810.25%77.3294.577.420 - 14.362Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-7216-0004917,2160.25%57.4263.717.630 - 14.432Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-7552-0004947,5520.25%56.2762.437.979 - 15.014Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-7584-0004937,5840.25%56.3062.518.009 - 15.186Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - E/E (60/40) to MIL-F-48616 (section 4.6.7.2) A
SLWP-8204-0015788,2040.25%81.1495.128.474 - 16.408Fully blocked lowersØ25.001.00Ø23.00 GeSurface Quality not classifiedC - Unclassified
SLWP-8227-0006778,2270.25%68.8486.758.588 - 16.454Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8306-0006768,3060.25%69.7488.948.791 - 16.612Fully blocked lowersØ23.001.00Ø21.00 GeSurface Quality not classifiedC - Unclassified
SLWP-8325-0005438,3250.50%78.1891.238.659 - 16.650Fully blocked lowersØ25.001.00Ø23.00 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8325-0005458,3250.25%77.4690.488.653 - 16.650Fully blocked lowersØ25.001.00Ø23.00 GeSurface Quality not classifiedC - Unclassified
SLWP-8388-0006748,3880.25%69.9189.518.959 - 16.776Fully blocked lowersØ23.001.00Ø21.00 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8669-0008918,6690.40%74.8989.408.912 - 17.338Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8688-0008928,6880.40%74.8991.599.088 - 17.376Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8693-0009238,6930.30%76.4191.069.024 - 17.368Fully blocked lowersØ25.401.00Ø23.40 GeSurface Quality not classifiedC - Unclassified
SLWP-8697-0008938,6970.25%77.9893.439.079 - 17.394Fully blocked lowersØ25.401.00Ø23.40 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B
SLWP-8708-0005488,7080.25%78.9594.328.980 - 17.416Fully blocked lowersØ25.001.00Ø23.00 GeScratch/Dig - F/F (80/50) to MIL-F-48616 (section 4.6.7.2) B

Return to All Stock Filters Page

Back To Top