- High throughput in selected parts of Near & Mid InfraRed-spectra
- ATR-tip shaped for immersion in liquid flow without dead zone
- Robust for industrial applications in harsh environment up to 250°C
- Resistant to high pressure
- Compatible with all spectrometers and automated process-interfaces
FlexiSpec® probes from art photonics include new type of Attenuated Total Reflection (ATR-) probes designed for harsh application conditions.
HT-ATR immersion IR-fiber probes can be used for process-spectroscopy in Near & Mid IR range to monitor reactions in-line in a broad temperature range from -100° to +250°C. They can resist to high pressures up to 200Bar and used with FTIR or any other IR-spectrometers and spectral sensors in automated process control with process-interfaces.
Applications:
- Remote Reaction Monitoring in-line in temperature range -100/+250°C
- PAT applications in lab, pilot plant or industry with process-interfaces for automated process control
- Polymerization Process Control
- In-situ IR-Spectroscopy for PAT in Chemical, Petrochemical, Atomic, Biopharmaceutical & Food Industry
Specification of IR-Fiber HT-ATR-Probes for High Temperatures FlexiSpec®
| Probe Type | Diamond ATR | Silicon ATR | Cubic Zirconium ATR |
|---|---|---|---|
| Transmission | 5.2-17µm (600-1900cm -1) + 3.2-4.5µm (2300-3100cm-1) | 5.2-17µm (600-3100cm -1) + 3.2-4.5µm (2300-3100cm-1) | 1.5-6.5µm (1550-6650cm-1) |
| Fiber Type | PIR-900/1000 Silver Halide | PIR-900/1000 Silver Halide | CIR 500/550 Chalcogenide glass (As-S) |
| Temperature range | -100°C / + 250°C | -100°C / + 250°C | -100°C /+ 200°C |
| Pressure (max) | 200Bar | 100Bar | 100Bar |
| Common Parameters of HT-ATR-Probes for High Temperatures FlexiSpec® | |||
| Total Length | 1.5m (opt.: 1m to 5m)* | ||
| Shaft Length | 300 mm (opt.: 300-700 mm)* | ||
| Shaft Diameter | 12mm | ||
| Shaft Material | Hastelloy C22 | ||
| Length of Legs | 500mm (opt.: 200mm to 500mm) | ||
| Protective Tube Material | Liquid Tight SS-Conduit, KOPEX-Tube | ||
| Minimal Bending Radius | 130mm | ||
| Input / Output Connectors | Long SMA (opt.: any other type) | ||
| Cooling Air Flow Parameters | Excess pressure 0.5Bar, Flow 2300l/h | ||
| Inner temperature control | Inside shaft to control ATR tip temperature | ||
Application Notes: Fiber Optic ATR-Probes for Harsh Environments
Summary Table for Fiber Optic ATR-Probes
Instruction Manual for Fiber Optic ATR-Probes